Get a free IoT starter kit.

eSIM (eUICC)

eSIM is the most significant development in SIM technology in over 25 years. Otherwise known as eUICC (Embedded Universal Integrated Circuit Card), eSIM provides your business with the ability to manage the roll out of your M2M connectivity solution Over-The-Air (OTA).

Our M2M SIMs are available in eSIM (eUICC) format

Have an IoT project but don’t know where to start?

Get a free IoT starter kit.

Remote eSIM provisioning with eUICC

For small scale deployments, it is a very simple task to physically swap out your SIM cards. However, most large-scale connectivity deployments aren’t as accessible. SIMs are often embedded in devices and scattered across many different remote or hard to reach locations, spanning multiple countries or continents. eSIM removes the necessity for site visits when SIMs need to be swapped, enabling your entire M2M SIM estate to be reprogrammed Over-The-Air (OTA). So if you need to change tariffs or take advantage of a different MNO’s coverage, you won’t have to physically touch your hardware; it can all be achieved remotely.

Put our M2M eSIMs to the test with a free IoT starter kit

Request your free IoT starter kit and kickstart your journey into the world of IoT today!

Know the difference.

eSIMs can hold multiple SIM profiles

Traditional SIM cards can only hold one SIM profile, meaning they are very one dimensional. eSIM provides you with the flexibility to add multiple SIM profiles to a single device, giving you multiple connectivity options to use at your disposal. If you want to change network operator in line with your alternative SIM profile, simply switch as and when you need to. This is particularly effective if your IoT sim equipped devices move from one country to another.

Don’t settle for second best.

Roam 400+ networks across 200+ countries with eUICC

Our eSIM connectivity solutions are multi-network compatible, just like our standard M2M SIMs. They are also non-steered, meaning they don’t have a parent network. Instead, our multi-network eSIM solutions are open to connecting to the strongest network available in your location, allowing for increased up-time and faster connectivity.

Know the difference.

eUICC is available for any device – eSim Form Factors

It’s a common misconception that eSIM is only available as an embedded solution, but this is not true. At InfiSIM, our eSIM packages are available in the form of triple-cut SIM cards or as an embeddable solution (primarily used by OEMs). Our triple-cut SIM cards give you the option to deploy 2FF, 3FF or 4FF M2M SIM cards, depending on the requirements outlined by your hardware.

Feature Standard SIM Micro SIM Nano SIM Embedded SIM
Form factor 2FF 3FF 4FF MFF2
Dimensions 25mm x 15mm 15mm x 12mm 12.3mm x 8.8mm 6mm x 5mm
Operational temperature -25°C to +85°C -25°C to +85°C -25°C to +85°C -25°C to +85°C
Endurance (write/erase cycles) Min 500,000 Min 500,000 Min 500,000 Min 500,000
Data retention time 10 years 10 years 10 years 10 years
Flash memory 64K 64K 64K 128K
Vibration standard No No No No

Know the difference.

Manage your eSIMs with NOVA eUICC

NOVA eUICC is our online management platform for eSIM deployments.

  • Administrate your eSIM deployments

  • Analyse data usage in real-time

  • Run usage reports

  • Set up and manage usage alerts
  • Apply auto bars and opt into auto bolt-ons

  • And much, much more!

NOVA eUICC platform on laptop
Hayley Group Ltd Logo

Intelligent vending & business automation

Hayley Group adopted the InfiSIM platform for their Intelligent vending and IoT business automation system as a standardised platform for our 4G based systems. The benefits Hayley Group achieved were in all areas of the platform, the major benefit to Hayley Group was a single management platform to see a fleet of machines through a single dashboard. The SIMs became multi network allowing additional redundancy to a single SIM carrier allowing our systems uptime to increase and aggregated data allowed for machines to reduce over charges and data outages. We have more control and cost savings achieved have led our business to engage in all our equipment being 4G ready.

Know the difference.

Get a free eUICC IoT consultation

With a wide range of solutions for deploying eSims, just tell us your project goals and requirements and we’ll happily work alongside you to recommend the perfect IoT connectivity solution for your business.